Re pipe in copper or replace the pipe with the hole in it. Chances are all the steel is gone so when you try to take apart the threads, they will just shear off. You might find yourself in a world of hurt. Good luck. You will need it!
Depending where the pin hole is one can use a bronze rod and braze the hole . If you know how to weld then welding is the way to go
One does NOT just install copper without know the PH of the water, velocity etc.
yes
try jb weld or some other type of epoxy; your local hardware store clerk can show right to it
Cut out the section with the pin hole and use a compression union
emergency generator is located in the above the waterline to mnimize danger of flooding
D2 tool steel is a steel, tool steel. For cold rolled steel, D2.
I have a waterline leak at my home from the street to my home....can I get a grant to fix this leak?
HOW TO INSTALL A WATERLINE
Waterline - song - was created in 2011.
The waterline is the bottom lip of your eye lid. Pull down your bottom lid of your eye and you will see the rim. That is the waterline.
The duration of Walking to the Waterline is 1.67 hours.
My dad bought a piece of steel to fix the shed.
Walking to the Waterline was created on 1998-06-13.
yes
Waterline corrosion: when water is stored in a metallic tank, it is observed that the metal below the waterline gets corroded. It is because the water below the waterline is poorly oxygenated and acts as an anode. The metal above the waterline is highly oxygenated and acts as a cathode. Hence corrosion of metal below the waterline takes place.Any other questions skype mechristianschulte6474or email me at schultechrstn@aol.com
Waterline corrosion: when water is stored in a metallic tank, it is observed that the metal below the waterline gets corroded. It is because the water below the waterline is poorly oxygenated and acts as an anode. The metal above the waterline is highly oxygenated and acts as a cathode. Hence corrosion of metal below the waterline takes place.Any other questions skype mechristianschulte6474or email me at schultechrstn@aol.com
try jb weld or some other type of epoxy; your local hardware store clerk can show right to it
An inverted image is formed in a pinhole camera because the light rays coming from the top and the bottom of the object intersect at the pinhole.