0
How do you fix a problem with a radio clock and interior light and fog lighter in a Mitsubishi FTO 1997 - fuses are okay?
Wiki User
∙ 14y ago
You should check if there are any torn wires , if so you should repair them
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Which fuse is for the clock on the 2003 Mitsubishi Eclipse?
its the same fuse as the lighter.. needs a 15 fuse...
How do you replace the interior clock in a Ford Fiesta?
replace ford fiesta clock
Where do you start to finding the cause of a problem with a 1998 Toyota Corolla radio?
AnswerCheck the fuse1996 corolla fuse is in kick panel next to driver!!! cig lighter and clock and radio!!!
Where are the clock fuse for 2001 eclipse?
It is the same fuse as the cigarette lighter.
How do you change the clock of a Mitsubishi diamante?
Switch key into Aux position - push mode button and use up/down arrows to adjust the clock.
How do you set clock on a Mitsubishi space wagon?
start you car and use the h and m button to set the time you can only set the clock when your car is running
Cant change time clock on Mitsubishi outlander?
There should be a round clock in the center of the dash. If so, look closely; you'll see the push buttons.
Math clock problem?
yes
The 25 amp fuse blows and the radio clock goes off when you try to use the cigarette lighter The power to the lighter and radio is good cannot see any obvious wiring short What could the problem be?
The lighter itself is toast. There is a short inside so when you click it in too much current is drawn and it blows the fuse. The coil inside has a short.
Why is my 92 Accord radio dead with no battery backup for clock or lighter but radio and car fuses ok?
check your radio backup 7.5 amp fuse in the engine compartment fuse box. It also controls the clock, not sure of the lighter.
Should clock stay on when car off 04 passat?
from all model from 2002 to 2005, the interior clock and mileage stay on after car is off.
How do you take clock out of crv 2000?
If the clock is not working, it is most likely an internal problem with the clock itself. Check out the below website:.
