Use WD-40 or Deep Creep from Seafoam and spray in the tube where the gas pedal cord goes in. Do it from both sides: from inside the car and from the engine compartment.
Chances are the throttle cable from the pedal to the throttle body needs replacing.
how can i fix the code po441 for toyta Camry 1998
same thing started happening on my '97, you will probably need to have a new clutch cable installed. when they get old, sometimes they will start to fray which causes them to stretch and causes your pedal to become sticky.
You can take the car to any nearby Autozone and have them reset it for you (for free). But eventually you have to figure out what is turning on the light and fix it!
looks like you need to bleed your brakes they most likely have air in them and bleeding them should fix this
tape is sticky because it is made to help people fix broken things
How do i fix the TPS pedal position sensor in a grand prix pontiac 2004.
I had the same problem for almost a year and damaged both engine mounts and trans mount. The fix was simple. The throttle body was gummed up and sticking. Took it apart and cleaned it with carb and throttle body cleaner and no more sticking. Smoothest pedal in a year.
Handy Manny - 2006 A Sticky Fix Paint Job is rated/received certificates of: Australia:G
get a new v sleave
Sounds like you didnt fix it to me. But on the clutch pedal, if you see where it's connected up and in near the firewall (inside) it has a bolt that MIGHT be loose. Check it.
http://www.allpar.com/fix/nostart.html