if it only flashes fast on one side, you have bulb out on that side. If both sides are fast, change the flasher
Trouble code P0717 means:Input/turbine speed sensor circuit no signal
remove side inner panel and remove the nuts and assembly will come out
where is location for fuse or whatever makes the turn signals work. they turn on but do not work
It's under your dash on the right side of the steering column. it looks like a little silver metal canister. If you are talking about the turn signal/ hazzard light flasher that is.
the clicking sound is the blinker. when you signal to turn with your blinker the light flashes and makes a clicking sound.
It could be the flasher or the signal relay switch. You could take it to NAPA or Advantage and they would answer this question for sure for you.
I believe that an assembly in trunk needs to come out and in that assy you will bind a light housing connected that holds the bulb in question
It is located under the dash on the drivers side, mounted on the passenger side of the steering wheel. There are 2 flashers there. One for the turn signals and one for the hazard lights.
gently pry the headlight swith from the dash, black box hard to see i the hole if out of place remove driver hush panel and fis about for it in that area
When blinker is blinking too fast it usually means one of your turn signal bulbs are burnt out. Check if bulbs are working. If not replace blown bulb.
Bad flasher.
You turn the turning signal up to go left and down to go right. You turn the turning signal up to go left and down to go right.