How do you fix an error code E1 on west pointhome electric blanket?

If you have Westpoint Electric Blanket model 900 E82691 and it is reading error code 6 what is wrong with it?

How do I reset an error code 6?

You have Westpoint Electric Blanket model 900 E82691 and it is reading error code 3 what is wrong with it?

An error code 3 on a Westpoint electric blanket means that it is getting too hot or the heat flow is restricted. If you have it tucked under your whole body or tucked under your bed; un-tuck it to allow the heat to flow properly.

What does E mean on the control for electric blanket?

It means "energy saver" as in it doesn't use electricity but its own heat to conserve itsself.

What does the flashing FF code mean on the thermostat on the Sunbeam electric blanket?

A flashing "FF" would be an error code of some sort. Check the owners manual that came with the blanket, or call Sunbeam's customer service line and ask them.

What does the flashing FF code mean on the thermostat of the Sunbeam Electric blanket?

A flashing "FF" would be an error code of some sort. Check the owners manual that came with the blanket, or call Sunbeam's customer service line and ask them.

Where can you get instructions for Beauty rest electric blanket?

Keep getting e code when first turn on will not work u

What does error code 28 and 23 mean on a Nissan forklift?

what does it mean code 32, on a nissan electric pallet jack..?

If you have an electric blanket Martex Raschel Microfiber Electric Blanket and it is flashing an error code of E-4 What does that mean?

Apparently, West Point Home or Martex had problems with some of the controls for the electric blankets. Some have temperature boosts and come on with that system on and then click off as they flash the error message. Others flash one number, then the error, etc. Martex has a button on their website where you can email the heated blankets department directly. (Guess they had a lot of complaints to set up a heated blankets link!) I would start there and see where that leads. I have three blankets erroring and they are brand new. Just emailed the heated blankets dept and will wait for a reply. I am hoping that leaving my call back as my husband's law office will expedite things. Electrical and faulty are two words that don't go well together. They spell electrical fire and lawsuit f not attended to. I recently received a replacement blanket.

What is error code 0x4ff02?

Error code: 0x4FF02

You have an electric blanket by West point Home Inc Model 900 E82691 and the control is flashing an error message The instruction manual has been lost how can you get a replacement to decode the error?

Yeah, it says to send it in for service when that happens - or I guess you could just live with one remote instead of two. I have to send mine in and I've only had it 15 days! This is ridiculous!***********************************************************Try this. I just last night got the answer to the "E" code on the electric blanket control. When you get the "E" code (1) turn the blanket off. (2) Next unplug both blanket and electricity. (3) Next insert control plug in blanket. (4) After a few seconds (when blanket has recognized it has a plug in it) plug the control into electrical outlet. The "E" code will have been reset to normal. Good luck. It worked for me last night.***************************************************Tried that, but realized my blanket, in fact, has a malfunctioning side. Proved it when I switched controllers to other side. Sure enough, the same side would show the flashing Error code 6. Only got one year out of this blanket.I have a similar problem, only a code 1 and E. I am also unable to turn the controller off. The blanket is one month old at most. If you are looking for an electric blanket I suggest NOT buying West Point**************************************************I have a Westpoint Home blanket that's been in use for exactly 8 days and already has an error code. I haven't tucked the blanket in, or done anything the instructions said not to do. I unplugged the blanket. Unplugged the wall outlet. Tried everything, and it still gives me an error code. EIGHT DAYS was all I got! Now, I have to mail this thing (during the busy holiday season) back to the manufacturer for a warranty repair! My suggestion to you is to never buy anything from WestPoint Home again! EIGHT DAYS of functionality was all I got!=====================================================Hey! I have the queen size dual control, and I've been getting that annoying E message and the number 4 on one side only-the other side works fine, but I just tried the advice above that said to unplug the electricity AND then unplug the actual plug-ins to the blanket itself, etc. Well, I did that, and waited at least a minute, then plugged in the plugs to the blanket, and then to the electricity. WELL, I still got the E error, soooo I lowered the number down to number 4, and it worked! It didn't go to "E", then I raised it to 5 and waited a minute and then was able to raise it to 6. It's been about 7 minutes now and it's still on! Sleep warBought my blanket 9053 king size control 900 . Developed E3 error on one size sent back to Westpoint and was refused service because of no sales slip. found sale slip but was refused service because it was an ebay sale. Was one year into a five year warranty. They offered to sell me new controls for $25.00 but when I asked if the new control was modified to correct past problems they said no. I don't feel this company is customer friendly and quibbles over warranties. I would not recommend their productsWe have had the king size for at least 3 years and last night we got the error "E" on my husband's side. I noticed that he had worn thru the button so I unplugged all as above, put heavy duty tape over the button, plugged in the plug to the blanket, waited 2 minutes, then plugged in to the electricity. Fixed. Don't know for how long but it's been working great a few hours now!#######################################################This is my third winter with this blanket. Flashed error code for first time. Unplugged everything. Re-plugged in, still flashed error. However after pushing in the on/off button and holding it in while pushing the up arrow and then the down arrow for temperature setting, it turned itself off. I waited several minutes and then turned the blanket on and guess what? No error message. It looks like it is operating as it should. It began heating, but had to shut it off to go to work. Will check it tonight and report back.

What is error code 8002A231?

Error code 8002a231 is a PlayStation error code. This code is generated when someone attempts to log into a PlayStation with an account that has been suspended.

What is error code 418?

Error code 418 means "I am a Teapot". The error may also be Short and/or Stout. This error code was introduced as an April fools joke.