Ok... you have to reset the printer --
How to reset the Canon MP150 after a refill (Step 10 concerns refill; instructions below the steps):
Method1 (Safe Factory Method):
1) Disconnect the printer's power outlet
2) Press and hold the power button while connecting the power outlet back.
3) While still holding down the power button, press the reset button twice.(red circle with a triangle)
4) Release the power button
The printer takes about 10 seconds to show the number 0.
5) Press + to change the value from 0 to 1.
6) When this value is 1, press colour button; this will light up two leds.
One is for plain paper and the other for photo paper. At this point is feed the printer with paper.
7) Press the power button twice and the printer will print a some stuff (if it doesn't print by itself, then press the "color" button once and the test sheet will print). Don't worry much about the printed material. I got some stripped lines and some numbers. I believe that my colour cartridge is clogged which is why I got the green strips.
When you print this sheet the value in the display returns to zero.
8 ) Open the printer cover cover (not the scanner cover) and remove the cartridges. With the printer still open, disconnect the power outlet.
9) Close the lid and turn on the printer.
10) Refill cartridges and place them back in their nice little abode in the printer.
Hpoe this helps
my canon power shot sd 1400is always says error E32 ? How do i fix this ? its a new camera
autoIt error how can i fix this problem
How to Fix file integrity violated Error
How to fix the error on FMC
How do you fix error code 489 on my android phone
How do I fix error code 1712 for Mac?
Can you tell me how to fix error Out of memory at line 23?
it can be different from error to error
You can try cleaning the lens to make sure there isn't any dust causing the error. You can also take the card and battery out for about 15 minutes and if your able to get to the menu after doing so do a factory reset on it and see if that fixes the problem.
depends what the error is
How can I fix Error code 80040154?
ECC can detect the error but cannot correct it.