they dont fit indicators to mercs, the majority of people who buy them never use them
by changing the alternator
There is not a reset for the break wear indicator light on the Mercedes-Benz GL450. You will need to fix the problem before the light will go off.
you fix whatever is making it come on :-)
You do not reset it, it is a fault code. It is not a routine maintenance indicator. Fix the problem and the light will go out.
Remove the connector from the back of your indicator light assembly. Take hold of the lightbulb, push in and turn at the same time. The lightbulb will come out. Reverse the process to install your new lightbulb.
It's done with a code reader plugged into diagnostic port under dash.
380 indicator switch
what need to do when indicator light is on
The third generation iPod shuffle has the indicator light on the top Êclose by the earphone port. This indicator light tells you about the battery charge status.Ê
The abs indicator light is on because there is a problem with the system. Until that problem is fixed that light won't go out. There is a code set in the computer of your car as to why the light is on. Many auto parts stores will read the codes free of charge if you buy the parts to fix it from them. Once you have made repairs the light will go off by itself.
We need to know which indicator light you speak of.
Which indicator light is it? If it's the oil pressure light, you need to find out if the oil pressure is down and if so, take care of the problem soon. If it's alternator, you should take it in to an auto parts retailer and have them run a quick, free diagnostic test. If it's the "door ajar" indicator, you probably have a bad switch.