some emc squash the wiring harness and end up breaking wires which earth out on the body and cause shorting out which causes the blowing of fuses
Dead short Disconnect wiring to these devices to determine what is causing problem
Because you have a short in there somewhere...my guess it's probably the voltage regulator.
You likely have a frayed wire to the stop light.
Check or replace the socket
There seems to be a short to ground in the wiring somewhere.
Short to ground in the wiring harness.
Overload or dead short in either one of the fixtures (remove bulb and check sockets one at a time) or in steering column
Try putting in a bigger fuse. Maybe the reason why your blowing is to much going through such a tiny fuse.
Short in the wiring.
why does my turn signal light keep burning out and why is the sockets and plastic lens melted.
A live wire in the audio circuit is touching metal, or connected to ground in some way.
Replace turn signal switch. Its grounding when you put turn signals on. I had the same problem and replaced it .Solved issues.