The u-braket that stratles the window has probably come off of one side. If you window motor and regulator still work, then the bracket has broken loose from the window. The only way to fix this is buying a new window. The u-bracket comes glued onto the window, there is no other way to fix it. I had both brackets come loose on my 2001, the brackets bolt to the window regulator. Hope this helps.
<<palm boy 051605>> I'd take it to the automotive glass shop (or have them mobile to your location). You should be able to get it done for a reasonable price (quick). That is unless you have time and interest in getting a lot of cuts on your hands from working (blindly) inside the passenger door (afer removing a bunch of trim pieces). PB
It's on the passenger side of the engine at the rear. You need to access it from underneath the vehicle. (unless you have really small hands!!)
No one until instructed! Driver should place his/her hands on the top of the steering wheel and the passenger front should put his/her hands on the dashboard.. anyone in the rear seat should put their hands out the side window if possible.. trick is no sudded movents or bending over for ID. This makes the officers nervous.
In certain circumstances (eg Trains) it can be as there is a danger that you could be injured. However sticking your hands out of your bedroom window would not be illegal.
Transportation Security Administration (TSA) officers may swab a passenger's hands to check for the presence of explosive residue.
Soak your hands in soapy water... Then it should just peel off
well as i can say the landlord because its thetre house so if any thing is wrong they repair it thats wat i am use to unless u did it and its ot in his hands
they can not put there hands on you unless they are breaking up a fight
It shouldn't be hard for you to install it... take your door panel off, turn the window sideways and just slide it in place, with the door panel off, put your hands threw the holes and straighten the window up... line up the holes from the bolts on the window to the bolts on the plastic that raises window up and down... when everything is tight, put door panel back in place and your done... shouldn't take but like 30 mins to an hour to complete... Good Luck
You get in the back seat, face the rear window and place both hands on the side of the light housing/speaker cover then pull straight back. It should pop out fairly easily. This worked on mine after reading that it should be pulled to the left (passenger side) on another web site.
One can obtain window treatment ideas by visiting and talking to a professional window washer. There is nothing better than learning from hands on experiences.
It is located on the passenger side of the car. If you look right behind the passenger head light you will see two pumps. Make sure you don't switch them because one controls the front windshield and the other controls the back. It was easy to do. I took the air filter cover off to give myself more room to get my hands in there.