In my 06 Charger, the back seats do fold down. There are fabric loops at the outside top corner of the back seat, pulling on them releases the top lock and the seat back will fold forward giving easy and roomy access to the trunk through the cabin.
The back seat doesn't fold down on the charger, to take it out you have to push io on the base of the seat and then push up to release the clamps that hold the base in place, this has to be done on both sides of the seat, once the base is out there will be 2 bolts that hold the back rest of the seat in, just remove the 2 bolts and it will come out.
remove the bolts from inside the trunk in back of the taillights.
Lift up on the seat cushions to release and remove them, then fold the back seats down and unscrew the assembly from their mounts and remove.
In the dodge design studios back in the day.
2006
First pull up the front of the seat bottom and release the retainer loopsSecond lower the seat backsFinally you should now be able to remove the bolts that hold the seat to the car
bottom of seat pushes in and then up to get it loose and then pull out, the back is held in place with 2 bolts to the floor and then slide the back up and out.
you can't, they didn't make them back then.
back in the day they were about $3,400 for the base charger and today you can figure about $40,000 for a base charger.
not to my knowledge.
To just drop the back of the seat there are loops tucked in between the seat and the side of the opening that have to be pulled to release the locks. They are close to the top of the seat.
The 2006 Dodge charger knock sensor is located on the back of the engine. The knock sensor will be near the bottom of the engine cover.
call a glass company to come and do it.