If you can find a bootable CD, put it in your PC and restart the computer. When it's restarted, go to the DOS. In there you can give a formatting order like this..
> At first type format
> It will ask you which drive
> Type the name of the drive that you want to format it (e.g: D:\ )
> You will receive a message asking whether or not you are sure
> If you type yes, it will start formatting it
Format di Drive after backup
It specifies the label of the volume. If you use the command format d: /v:hello It would format the d: drive on your computer and rename the disk "hello".
You have to find out where the BOOT.INI is. You might have two of them. If you have two of them you can format the d drive. If you have one on the disk d you have to use restoring CD to put BOOT.INI file on disk C. Again if you have BOOT.INI on c you can format d.
In Windows XP Go to: Start>Programs>Accessories> Command Prompt.At the command prompt enter: format c:/This will format and erase all of the data on the c: drive. If you also have a d: drive then do a format d:/ command before you do the format of the c: drive.Caution: be sure you want all of the data erased as this action is not reversable.
For any disk OTHER THAN THE ONE YOU BOOT FROM, simply open a command prompt and type: format d: (where "d" is the designator of the disk that you want to format) OR open windows explorer, select "my computer" then right click on the drive you want to format (again, it can't be the disk you boot from" If you want to format your C drive you'll need to boot from some other medium, such as the installation disk or a floppy.
The command used to format a drive is "Format".
I do not quite understand your question. If you have a class d license, you can drive a car all by yourself. You can also drive a car or small truck for someone else and get paid for it.
Start Windows Explorer, right-click drive D and then select Format. Of course, be sure to back up any data you want to save beforehand.
If you have a PC running Windows XP or 98 have a look at the following link: http://www.bootdisk.com/pendrive.htm I have had sucess with method 2 and 4. If you need to format the USB flash drive from a PC running DOS I can not help.
To Format Pen Drive: 1. Right Click Pen Drive and Select Format Option and Mark the Quick Format to Format your Drive (If it is not working then Format Drive without select Quick Format Option) (Now your Pen Drive will be Formatted) YOU RECEIVE ERROR REPORT THEN 2. Right Click My Computer Icon 3. Under Storage > Click Disk Management 4. Then Right Click The USB Drive and Click Format NOW ITs working
When you format a logical drive you prepare it for use.
you can format you d drive if you do not need anything on it anymore this willl give you back what it used to have]