first you need to take the screw out of the back hatch plastic panel that hold the pull down handle on. then u will need to pull down on all sides all the way around the panel and it should pop off. then you should see the motor once you have it off.
how do you replace rear wiper motor on a 1997 ford explorer
wiper motor not working on my 1997 BMW 740IL
Remove the wiring harness from the wiper motor. Remove the wiper arm linkage. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
* Remove the windshield wiper arms * Remove the cowl cover * Disconnect the electrical connectorr from the wiper motor * Detach the wiper motor/linkage assembly from the cowl * Remove the wiper motor retaining bolts and remove the motor
how do you get to and replace the wiper moter on a 97 marquis
On top of wiper motor
It is under the cowl below the windshield
It is attached to the wiper motor. It can be easily changed without removing the wiper motor. Unplug the wire harness to the wiper motor, remove the three small screws holding the cover in place, remove the cover, remove the pulse board.
Please clarify or explain what you are trying to accomplish. There are no dip switch setting on that wiper motor that I have ever seen.
You must first remove the wiper arms. then, remove the screws holding the black plastic grill under the wiper arms. This will expose the motor. You will then need to disconnect the wiper arm transmission linkage from the motor, the remove the three bolts holding the motor on. Install in reverse order.
Check either at the bottom of the windshield washer fluid reservoir or check to see if the wiper motor has washer hoses connected to it
Check that you are not turning the wiper switch to "delay." I had problems with my 1997 jimmy wipers not working. Check the wiper control box, relay switch, Mine works now.