0
Add your answer:
Earn +20 pts
In WYE 480VAC each leg to neutral is equal to how many volts?
In WYE 480 VAC each leg to neutral is equal to 277 volts. 480 / 1.73 (sq root of 3) = 277.
How do you convert 24 vac to 5 vac?
You can convert 24 vac to 5 vac with a transformer with windings in the turns ratio of 24 to 5.
What is a ghost vac?
the ghost vac is a object used to suck up ghosts
Can you use a 18 ufA 450 VAC instead of a 18 ufA 500 VAC?
Maybe if the voltage across capacitor will never exceed 450 VAC.
How many amps will a 3 hp motor pull on 230 volts?
It depends on the voltage of the motor, and whether it is single-phase or 3-phase. A 120 VAC 2HP single phase motor draws almost 20 amps, a 240 VAC single-phase 2HP motor draws about 10 amps. A 480 VAC 2HP three-phase motor only draws about 6 amps.
What is the ratio of a 480vac single phase and a 120 vac secondary voltage?
The ratio for a 480 VAC to 120 VAC is 4 to 1.
What would the input current be for a 275 kva transformer with 2 phase of a 480 vac in and 120 vac at 20 amp output?
qsq
You have two devices that are rated at 230 VAC single ph and your supply voltage is 480 VAC 3 ph you need a 480 VAC 3 phase to 230 VAC three phase xfrmer how do you calculate the xfrmer size?
The transformer size is calculated by using the load current that is required on the secondary side of the transformer. This secondary current is multiplied by the secondary voltage times 1.73. This total is then divided by 1000 to give you KVA. KVA = I x E x 1.73/1000.
In WYE 480VAC each leg to neutral is equal to how many volts?
In WYE 480 VAC each leg to neutral is equal to 277 volts. 480 / 1.73 (sq root of 3) = 277.
How many amp in 480 vac 3- phase primary transformer if the secondary it's 120 vac?
This 480-v three-phase transformer probably has a 208-v three-phase secondary which has 120 v from each line to neutral. In that case the primary current is 0.433 times as much as the secondary current, so 100 amps in the secondary means 43.3 amps in the primary.
What is the maximum amount of amperage allowed on a 10 gauge wire if it's part of a 480 VAC circuit?
10 AWG should never carry more than 30 Amps.
How do you convert 24 vac to 5 vac?
You can convert 24 vac to 5 vac with a transformer with windings in the turns ratio of 24 to 5.
What are the acceptable power ranges for 480 vac equipment?
All electrical equipment, regardless of the voltage, should have a voltage supply that is no more than plus or minus 5 per cent of the equipments stated voltage requirement.
How do you get unbanned from vac?
its impossible unless you work for vac
Is vac Greek or Latin?
Vac is Latin
What is the voltage of line voltage?
It varies from country to country. In the USA it is 110 volts, in the UK it 230 volts +/- 10%/6%. In practise in the UK it is 240s volt +/- 6%, the slightly odd looking specification allows harmonisation with rest of Europe. In all these cases, the mains voltage is supplied AC (alternating current) and the voltage is given as root mean square (RMS). The peak voltage in the UK is 384 volts.
What is 475 rounded to the nearest ten?
480
