Want this question answered?
hi there. i have myself an xk8, 4l -97 model. from my experience if the Valet mode is activated is possible that the button wont work , to prevent the valet to open the trunk. to over run the valet mode, use the ignition key to open the trunk. regards cr4zy_jaguar
Yes a Parrot CK3100, it works in my 96 XK8 (97 MY if you are American)
No, the 99 and newer transmissions are different than the 97 (which is also different than the 98). Only a 97 model (exact same model number on the tag on the side) will work in a 97
There is a key hole between the X and K on the rear XK8 emblem.
the purge valve on the gas line is rusted inside. It is located inside the left front wheel well behind the cover. Easy to replace. check youtube for video.
Put the key in the driver door lock, turn clock-wise and hold to lower top; counter-clockwise and hold to raise top. Chimes will sound when the operation is complete.
i own a 1999 jaguar xk8, i just want to say jaguar charges way to much to inspect a your car. i would encourage all jaguar owners to research maintenance on their cars before they pay their price. the jaguar xk8 body style and engine has been the same since 1997 thru 2006 so hopefully this info is helpfull to you. with that being said the low pessure service port is located near the firewall on the passenger side of the vehicle.it is aluminum pipe covered by a black twist off cap.take the cap off to access the port. let the engine cool before you do service it because you might burn yourself. this info comes from a jaguar technical service CD that i bought off eBay.i had to charge my ac system when i pulled my car out the garage because it had been sitting all winter. always here to help
under the windshield
sport & normal
The mode is the number that appears most often. As all the numbers appear once, there is no mode for that set of numbers.
For a 94-97 (may work for 98) single button remote: - Flip Valet switch to ON position - With key in ignition, turn key to ON, then OFF - Flip the valet switch to OFF, then ON/OFF, ON/OFF (that's twice), and you should hear a confirmation siren chirp. - Turn the ignition switch On/OFF, ON/OFF (twice), and you should get another confirmation chirp. - You are now in programming mode. Push button on the remote, and you should hear a chirp to confirm programming completed successfully. - After 5 seconds, the programming mode will close automatically.
Mean = 98 Median = 97 Modes = 95, 96, 97, 99 and 103 To those who would argue that there is no mode, the number 98, for example, was observed 0 times. Consequently, these five numbers appeared more often than 98.