By default for Linksys routers, the user name is empty, and the password is 'admin'
For D-Link routers, the default user name is 'admin' and the password is empty.
Try that out, but if you've changed your user name or password and can't remember it, then you would have to do a reboot of your router by holding the reset button for about 10 seconds.
you can search google for the default password for your 2wire router/gateway. or if it has a reset button the back, you can likely hold it down for about 10 seconds and reset it back to factory defaults, and use the default password from your google search.
I assume you are logging into the default gateway because you wish to change something in the configuration (that is really the only reason for requiring authentication in a DG). If you don't know the userid and password you will need to find someone who does. Unless you are responsible for that DG they aren't likely to tell you.
The address of a default gateway can vary widely depending on which device on which network is the default gateway. There isn't one specific default gateway address.A popular address is one used on home based networks, 192.168.1.1
10.35.88.12How could the default gateway be the workstations IP address? the default gateway would be the first available IP address in this case 10.35.88.1 it would have to go through your default gateway to get to his default gateway and be sent to his workstation.
Typically this address would not have a default gateway, since it is an APIPA address, which is not routable.
There is no default password
ip default gateway
default password
MAXAMUUD (QOJE, FARASKA SOOL)different between gateway and default gateway gateway is converter of your network and default gateway is In computer networking, a gatewayis a node (a router) on a TCP/IP network that serves as an access point to another network. A default gateway is the node on the computer network that the network software uses when an IP address does not match any other routes in the routing table.
open your browser and type in http://192.168.2.1 and this will open your router settings. go to the security tab and it will either come up with your security settings or ask you to login. if it asks for your password, the default belkin password is nothing. just click continue and your password setting will come up. from there you can change your password, encryption type, security mode and guest password.
Yes, that is what the default gateway is used for.
what is the default password for galaxy s2