Paint the gap round the edge of the lid with turpentine or kerosene and allow to stand. Firmly tap the top edge of the can with a hammer all the way round. Prize lid off a little at a time with the widest, flattest blade possible.
Yes, the solvent of the polish will evaporate when the lid is off the bottle.
The lid will come off because as the water heats up it expands and turns to steam. This pushes the air inside upwards so forcing the lid to rise.
Try Coca-Cola
his is an ad I found for the vintage Hershey tin - I have this tin but the year 1990 so maybe there are different years for production of this .. Hershey's Sweet Milk Chocolate Tin (1990). Replica of 1912 Vintage Edition #1. Contains Plastic liner and 4 empty Hershey's Chocolate wrappers. Has 1 small dent on lid otherwise in excellent condition $10.00
The powder gives off carbon dioxide bubbles when mixed with water. The bubbles try to escape to the surface. If you block that off by putting a lid on the pot it is in, the bubbles will cause a build up of Carbon dioxide. If you pop the lid off with your thumb the lid will fly across the room due to the reaction that occurred.
The tin lid in your family is your kid :)
Heat the pot back up, everything will expand again and the lid will come off.
The air inside the tin will expand when heated causing great pressure on the inside of the can. If the pressure inside the can is greater that the force holding the lid on, then the pressure will force the lid to pop off off the can. have to heat it then and go crazy
Use a pair of pliers to open the can. Alternately any small piece of thin hard metal can be used to roll the can lid off if you get it tight when you start rolling back the lid
Because the Ice-Cream had no bones. HaHaHaHa...
Here are 10 to start off with: pot, pan, tap, hob, fat, mat, gas, tin, rag and a lid
A coffee can lid is just that, a lid that cap a tin of coffee grounds or beans. In older cans and more high quality grades of coffee, the can and lid are made entirely of metal. Modern convenience and mass production usually sees coffee can lids now made of plastic, much like a peanut tin lid, complete with a peel-back metal seal.
help with this problem?
Hell with the Lid Off was created in 1990.
you can't
because da lid is on der!
If it stuck in your CD system your going to have to take the CD system out of your nisson and either take and have professional do it or take off the lid and other material and take in it from the top