The lid will come off because as the water heats up it expands and turns to steam. This pushes the air inside upwards so forcing the lid to rise.
The powder gives off carbon dioxide bubbles when mixed with water. The bubbles try to escape to the surface. If you block that off by putting a lid on the pot it is in, the bubbles will cause a build up of Carbon dioxide. If you pop the lid off with your thumb the lid will fly across the room due to the reaction that occurred.
Yes, the solvent of the polish will evaporate when the lid is off the bottle.
There is a heating element in the kettle. As the water boils, the inner temperature of the kettle rises. Once the boiling temperature is reached, a small thermostat is triggered which turns the kettle off, so as to not boil continually. This thermostat works optimally with the lid on the kettle fully closed, if the lid is not fully closed, it does not switch the kettle off as quickly.
I did a science project on how long it takes to boil water by changing variables. One of them was to add canola oil (the same as vegetable) and it ended up boiling almost a minute faster than just plain water!
Paint the gap round the edge of the lid with turpentine or kerosene and allow to stand. Firmly tap the top edge of the can with a hammer all the way round. Prize lid off a little at a time with the widest, flattest blade possible.
If the container is plastic the lid will expand and pop off. If the container is ceramic/glass/metal condensation will form on the lid from the steam causing the food to 'sweat'.
pop the hood, on the left side side towards the fire wall there is a reservoir [ plastic container] should have a black lid with four tabs pull off the lid and fil up. pop the hood on the drivers side towards the firewall there should be a reservoir [ plastic container ] with a black lid and four tabs on it. pull off the lid and fill up pop the hood on the drivers side towards the firewall there should be a reservoir [ plastic container ] with a black lid and four tabs on it. pull off the lid and fill up pop the hood on the drivers side towards the firewall there should be a reservoir [ plastic container ] with a black lid and four tabs on it. pull off the lid and fill up
A normal kettle is a semi-closed metal container (with lid and spout) of water. When placed on a flame, the water inside the kettle heats up until it reaches boiling point. It is then ready to be taken off the flame and the boiling water poured into a teapot, or some other beverage, etc.
the pressure inside the pot will build up and pop the lid off
Hey im 13 and I got this answer from school : twisting the lid off a container! hope i helped :)
They can be hard. I usually twist the lid off. (remove the tape first.
I use a glass jar with a screw on lid. It can be frozen and put into the microwave with the lid off to thaw. So, there are several advantages using the jar.
well yeah but sooner or later the oxegen would kinda like fade think of it like this if you took a container and had it under water like this picture bellow pretend the rock is a container ok so if the lid is off the contaner and it is under wter and you put the lid on and lift it up is there water in it yes so just imagine the water was the air aka oxigine but you cant see it sorry i couldn't find a better picture .
If the lid was on the container all you would have to do is take the lid off so that the gas can escape. In other words, when the gas escapes, the amount of pressure is reduced (decreased). Certainly true if the gas pressure inside was originally higher than atmospheric pressure. Another way would be to cool it.
Hell with the Lid Off was created in 1990.
The powder gives off carbon dioxide bubbles when mixed with water. The bubbles try to escape to the surface. If you block that off by putting a lid on the pot it is in, the bubbles will cause a build up of Carbon dioxide. If you pop the lid off with your thumb the lid will fly across the room due to the reaction that occurred.
If you mean the Dyson Animal Pro, you push down the button on top of the handle, pull the container off, remove the lid and empty the contents in the bin.