By unconvetional machining.EDM electric discharge machining.
It depends on the forces that would be applied on to the workpiece, a soft grinding wheel has more wear, and hence would not be affected much by hard materials. If we tried to use a hard grinding wheel, there would be large forces and hence a large wear on the wheel.
The word medium has more than one meaning. It can refer to a size between large and small, or the type of material with which a piece of artwork is made.
cooking a piece of beef...but not 100% sure
The US 1830 Large Cent has two kinds of lettering on the reverse of the coin, Large and Medium and the values between the two is also large, in the grade EF-40 a Large letter coin is $190.00. The Medium letter coin in the same grade is $1,200.00. So I suggest you take it to a dealer or collector for an accurate evaluation.
A bushing is a piece of rubber that separates two pieces of metal from touching and/or grinding.
The piece is done by the medium of acrylic, oil and magna.
i dont know piece out suckas
Surface grinding is a technical term referring to the production of flat, contoured and irregular surfaces on a piece of work which is passed against a revolving grinding wheel.
About 70 in a medium banana.
Modern dishwashers often have a built-in, small, garbage disposal. If a small piece of bone, or a small piece of broken glass gets into the disposal it can make that grinding noise. Best to have a service representative check it out.
Turning uses a knife edge to shear a piece off grinding uses a stone to abrade and break off a pieces the width of the stone turning point or line contact grinding area contact
In Surface Grinding, the kind of motor that is used is an A.C. Motor i.e the motor that operates with Alternating Current.The current amperage and H.P. specifications depends on the type of Grinding wheel as well as the type of work piece to be used to be ground.