Cut the pipe and remove it, fix pipe with a coupling.
It depends on whether it is a plastic cap - as in a bottle of soft drink - or a metal cap - as in a beer bottle.
Plastics make up the majority of bottle caps. They might also be created from metal. Based on its intended use and the type of bottle or container, the material used to make bottle caps is selected.
The cap is on the plastic overflow bottle on the firewall.
On the plastic overflow bottle
The cap material you use for a bottle is pretty much plastic. Best you can use is HDPE injection Grade
No. The plastic would keep the electric charge
it helps make sure there is no spillage or leaks.
What is the bottle cap made of?
if it's plastic pipe you can just buy a glue cap and glue it on. If it's galvanized or cast iron pipe you can use a gym cap, (arubber cap that comes with a hose clamp). Just put that on the pipe and tighten it down firmly. this will prevent any sewer gas from coming out of the drain.
An average plastic bottle weighs about 19 grams when its empty.
This will differ depending on the type of bottle. Even though the capacity of the bottles may be the same (2 L), the design of the bottle and therefore the cap used will be different.The diameter of the cap on a 2 L Coca-Cola bottle is 28mm.To measure the diameter of the cap that you are using, place your ruler across the middle of the cap and measure the length from one end of the cap, through the middle to the other.
It depends on how much pressure (C02) has built up within the bottle and what the bottle is made out of (plastic will produce more 'fizz' than glass. They would mostly produce the same, the bottle cap just releases all pressure at once while the twist off releases air slowly which changes the pressure gradually.