0
Once the factory installed the injectors in the motor, you can't bleed them effectively. On the older models, you could take the line loose from the injector and crink the engine until the fuel was bled out. Now you have to fill the filter with fuel and crank the engine until it bleeds itself. It can take a while and may require jumpstarting it with another vehicle. Don't crank it anymore than 10 seconds without letting it cool off for 20. The starter will get very hot and it could burn up.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Is the Eden Project the biggest biome the world?
generator air fliterAH1101generator air fliter AH1101cummins renewal part air fliter,generator air fliter for towing boat diesel , generator air fliter use for post boat cummins , generator air fliter of Marine Equipment engineAF25812 air fliter of cummins diesel engineAF25267 air fliter of cummins diesel engineAF872 air fliter of cummins diesel engineAF928 air fliter of cummins diesel engineClick to view before buyingare used for the following engines:cummins air fliter AF25813auto air fliter AF35267Construction air fliter AH1100generator air fliter AH1101engine air fliter AH1103diesel air fliter AH1106air fliter AH1135Click here for more information about the goods
Where is the maf sensor on a cummins 6.7 diesel?
It is on the air cleaner lid.It is on the air cleaner lid.
Howdid cummins meet emissions?
well cummins did not meet emissions they completely blew them out of the water with the heavy diesels the exhaust emissions coming from a newer cummins diesel is actually cleaner than the air that it breathes in for the combustion process
Where us the intake air temp sensor on an 08 Dodge 2500 with a 6.7 Cummins Diesel?
The intake air temp sensor is located at the back of the intake manifold(air horn)
When under a load what would be the most likely cause of a low power condition on a cummins 5.9l isb diesel engine?
Fuel or air.
Why is it hard to start your 98 dodge diesel?
Hard starting on a diesel is from a lack of fuel or a lack of heat/compression. Air in the fuel lines, plugged fuel filters, and broken electric fuel pumps are the more common hard start issues. Cummins engines use a grid type air preheater. If the hard starting is ONLY in cold weather this is a good place to start.
Does the cummins turbo diesel have glow plugs?
The Cummins 3.9L, 5.9L 12+24 valve and 6.7L do not have any glow plugs, they have a heater grid in the air intake just before the air enters the engine. after start up they use their high compression to stay running.
How do you bleed the fuel line in a 3910 tractor?
How to get the air out of the fuel lines on a 3910 diesel tractor
What has the author Earl M Kruger written?
Earl M. Kruger has written: 'Rebuild shop practices' -- subject(s): Diesel motor, Machine-shop practice, Maintenance and repair 'Engine overhaul' -- subject(s): Maintenance and repair, Spark ignition Internal combustion engines 'Introduction to Cummins engines' -- subject(s): Cummins Engine Company, Diesel motor 'Cummins engine assembly' -- subject(s): Diesel motor 'Maintenance of air intake, exhaust, and cooling systems' -- subject(s): Diesel motor, Maintenance and repair
What does PH 47 fit?
It ranges from Cummins V-903 Engines.to Ford DF-172 Diesel Engines. I presume that you are talking about the PH47 air filter, if I am not mistaken.
Have a 1985 f-250 diesel and you have air in the lines how do you fix?
Don't start a question with have.OK.
How do bleed air from the fuel lines on a Ford powerstroke diesel 1997?
NOT TRYING TO FUNNY THE LINES ARE INTERALL IN THE HEAD AND IS PRESSUREIZED BY THE PUMP ON THE CHASSIS
