Scrape it off as carefully as possible, you will probably lose the leather gloss, but this can be restored with a little polishing.
Ammonia is not a cleaner we'd choose to remove plastic from surfaces. It (ammonia) won't dissolve or "melt" the plastic, so it is ineffective in removing melted plastic from surfaces.
put it in a bowl of vinegar overnight and you should be able to scratch it off in the morning
To remove melted plastic from a wood floor, you will need an iron and brown paper sacks or brown craft paper. Lay the craft paper over the plastic. Apply the hot iron to the paper and apply pressure just until the plastic becomes soft. Once the plastic is soft, peel it off the wood floor.
lick it.
After the straightener has cooled down, use a comb or any pointed object and scrap it off. Additionally, if you are very careful, you can use a sharp scraper to scrape it off. A razor blade will work well if used at a very low angle and with a great deal of precision.
Put your shoe in the freezer for about 15-20 minutes. The wax will pop off. Then use leather cleaner.
I have seen plastic where an artist took a real piece of leather and heated the surface of the plastic, then pressed the leather into the hot surface. The look of the leather melted into the plastic, and he peeled the leather off, to reuse for another piece. Then it is painted the color of the leather. Another was is to use a painting technique of touching wet paint with a rag to make it look like leather. This method is explained in a book you can pick up at the paint store called faux paint finishes.
The best way to care for cow leather shoes is to use a soft, dry cloth to get all of the dust off of the shoe. Use soapy water and clean off the shoe before finishing with a leather shoe polish. Wipe the shoe off and allow it to air dry.
how can i get diesel fuel off my leather jacket
The easiest way to get melted plastic off of concrete is using a heat gun. You can heat it and them absorb with a porous scrap cloth.
It is history. The paper bag and iron is for wax. If you did that first, you just melted more plastic into the fabric. It will not come out. If you had froze it first, it might have popped off, or it may have already been into the fabric.
#
Buy a new element.
Smoke or gas let off by a melted plastic spoon is toxic and should be avoided. The cooled plastic can be disposed of in the trash in a normal way.
Ammonia is not a cleaner we'd choose to remove plastic from surfaces. It (ammonia) won't dissolve or "melt" the plastic, so it is ineffective in removing melted plastic from surfaces.
use hair dryer to get hot and scrap off or use ice to freeze off.
To remove a melted plastic bag from the bottom of a car, let the car cool down a bit, but not completely. Take a metal knife and chip the plastic gobs off.