First you need to find out where the water is coming from. If the block or cement walls are exposed, tape a 12 inch by 12 inch piece of aluminum foil to one of the outside walls (tape all 4 sides sealing the aluminum foil to the wall). After a day or 2 remove the aluminum foil from the wall. If the inside of the aluminum foils is damp but the back side (the side against the block or cement wall) is dry you have a condensation problem and good dehumidifier should solve the problem.
If the block or cement wall side of the aluminum foil is wet but the inside is not you have a seepage problem. The water on the outside of the wall builds up until the hydrostatic pressure is great enough and the water then seeps through the block or enters where the floor and wall meet. This can be solved by using an above floor baseboard system to drain the water to a sump pump or drain. Waterproof.com has an above floor basement waterproofing system that you can install yourself for around $4 per foot.
Read more: Why_basement_is_sometimes_wet
Basement waterproofing refers to the process of making a basement or cellar water-resistant. It involves various techniques and methods that are used to prevent water from penetrating into the basement and causing damage to the foundation and walls of the building. Some of the common methods of basement waterproofing include installing a sump pump, sealing cracks and gaps in the walls and floor, installing drainage systems, and applying waterproof coatings or membranes. These methods are designed to redirect or prevent the entry of water into the basement and protect the structure from water damage. Basement waterproofing is important because water damage can lead to structural problems, mold growth, and other health hazards. By preventing water from entering the basement, homeowners can ensure that their property remains safe and secure.
The best too for draining a flooded basement is a built-in sump pump. If your basement does not have a sump pump , you can rent a pump from most equipment rental stores. A wet/dry vacuum can also be used to remove water from a flooded basement.
I had this problem too. Just pour bleach in toilet and flush.
I think I have a water leak in my basement. What are some ways to detect and repair the leak?
There is nothing wrong with installing carpeting in the basement. There may be types of carpeting that work better with humidity in the basement. Be sure that your basement is sealed to keep water out before installing.
I would have to say probably. I would get rid of the water in your basement just to make sure. If you do leave the water in the basement and it creates mold it may cost a fortune to fix
Have the lines water Jetted to scour them properly and get rid of years of crud build up
You may not. It could mean the water proofing was not done correctly.
Definately, if the water is not fresh it will breed flies. Dry out the area & be rid of them.
A water pump would be the the best way to get rid of basement water. They are available to buy at most hardware stores and range anywhere from $25-200. A pump may also be available to rent. A plumber may be able to refer you to a store that carries pumps for sale or rental. He may even have one available.
You should use sealant on any cracks where moisture can get in. Make sure you have a clear drain to get rid of any water, and use a dehumidifier to get rid of the moisture in the air.
A SKUNK WAS IN YOUR BASEMENT????Idk, maybe air freshiner?Rent an ozone generator.
To water proof your basement, use Guardian Seal Basement Waterproofing.
Keep the basement clean and get rid of moisture. http://extension.missouri.edu/publications/displaypub.aspx?p=gh5928
I do. It is in my basement and I can't get rid of it.
A person can get rid of mice in a basement by setting up discreet yet effective mouse traps. Also, take care not to create a comfortable environment for mice to breed in your home.
Usually not.