500 to 800 with gear and restored
VIN: JYACB03W6YA009925 2000 Yamaha TTR90
No, Just 91 octain or better it is a 4 stroke motor.
The Yamaha 1200 motorcycle seat is held in place by four retaining bolts. Remove the retaining bolts and the seat will come off.
There is a hook on the end of the slide hook it onto the loop inside the carb.
Remove a bolt (hex) from either side at the bottom of the seat. Near the shock.
take bolts out at front left and right side then slide entire seat forward and lift off
The seat height on a 2001 Yamaha yz80 33.6 in.
20 - 21.5mm off the seat of the bowl gasket to the top of the float
The pilot screw setting should be screwed in until it is snug (not tight), then backed out 1 and 3/4 turns.
A person can remove the seat on Yamaha BW350 motorcycle by depressing the release under the edge of the seat. The seat can then be raised and removed from the bike.
Under the tail of the quad on the left side there's a release lever. Pull it and seat will loosen then take it off