The light is on because there is a problem with the ABS system. Until the problem is fixed the light will remain on.
THere should be an ABS warning light that comes on briefly along with all the other indicator lights when you turn the ignition on.
The abs light is on because there is a problem with the system and will remain on until the system is fixed. As long as the light is on the abs will not function.
The easiest way to reset the ABS light in a 1992 Chevy Lumina is to disconnect the battery for about 30 minutes. When it is reconnected, the light should be reset.
If you turn on the key and there is a light that says ABS, then it does. ABS was an option that year.b
The ABS light is on because the ABS Module detects a problem with the system. Until the problem is fixed the ABS light will remain on. Once the problem is fixed the light will reset itself.
Change the sensor located on rear-end housing
shut off abs light on 1998 es300
only way to turn off an ABS light is to fix the problem in the brake system that originally turned the light on
If the ABS light is on the ABS system has a problem and is not functioning. Until the problem is repaired the light will remain on. Take it to a mechanic and have it diagnosed.
The abs light is on because there is a problem with the abs system. Have the system repaired and the light will clear itself.
On a 1998 Ford Escort : It could be equipped with ABS brakes . When you turn the ignition key to the run position , just before starting the engine , see if there is an ABS light that lights up momentarily in the lower left area of your dash ( assuming the bulb is not burned out , or if it is not equipped with ABS brakes )
The abs light is on because there is a problem with the abs system. Until the problem is fixed the light will remain on. Once the problem is fixed the light will reset itself.