On the bottom of the door there are two bolts, you have to remove them. You'll need a small flat head to wedge between the panel and the door so you can release the clips, BE CAREFUL! These are easy to break. Once you get all the clips released you'll see that the door is still attached in the center, you need to use the small flathead to wedge in the interior handle, where you grip the door to pull it shut or push it open. It wont look like the center piece pops out, but I assure you it does. Once that piece is off, there are two more bolts to remove. Make sure you keep track of them. Silver are for the door handle, gold for the bottom bolts. Disconnect the speaker wire, and push up on the door panel. Be gentle because the power window and locks are still connected by a wire. Once the panel slips off, disconnect the lock and window wires. There ya go.
However, theres a pretty tricky little metal panel after the door panel. If you get it off let me know.
Remove the door panel. Find the track, for the passage window, loosen the track and put the glass, back in track. Put the track, back in track, and tighten it down. Put your door panel back on, and your ready to go.
To set the power window back on track in a Ford Focus, you have to remove the door panel. Once you get in there, you will see the track that you will need to put the window back on.
You can put a manual rollup window back on track, in your 1994 Chevy Cavalier, by removing the inside door panel. The window track is easily visible with the door panel removed.
Remove the inside door panel. The entire window mechanism will be visible. Put the window back onto the window track.
You will need to remove the inside door panel. With the door panel removed the entire window mechanism will be visible. Set the window back on the track and secure it with the retaining clips.
When a window goes off track on a 2004 Grand Am GT, the door panel has to be removed. The cable for the window is then reset on the track or repaired and the door panel put back on.
Take door panel off. and put window back on track.
You will need to remove the inside door panel of your Chevrolet Blazer. Remove the window retaining clips. Put the window back into the window track. Tighten the window retaining clips.
TAKE THE DOOR PANEL OFF FIRST
If a power window goes off track on a 1999 Camaro, the door panel can be removed and the window put back on the cable track. The door panel can be removed by opening the clips on the corners. If there are lights in the door panel, the light covers need to be removed first.
Remove the inside door panel of your 1999 Chrysler Intrepid. Remove the window retaining clips. Put the window back into the window track. Secure the window with the window retaining clips.
mY PASSENGER SIDE WINDOW CAME OFF THE TRACK AND YOU NEED TO TAKE OFF DOOR PANEL,REMOVE SPEAKER ,LOSSEN 1 BOLT THAT HOLDS THE TRACK (ABOVE SPEAKER) WINDOW SHOULD GO BACK IN SOME WHAT EASY.THEM TIGHTEN BOLT AND PUT PANEL BACK ON.