To set the power window back on track in a Ford Focus, you have to remove the door panel. Once you get in there, you will see the track that you will need to put the window back on.
You will need to remove the inside door panel of your Chevrolet Blazer. Remove the window retaining clips. Put the window back into the window track. Tighten the window retaining clips.
By pushing the button downwards
Remove the inside door panel of your 1999 Chrysler Intrepid. Remove the window retaining clips. Put the window back into the window track. Secure the window with the window retaining clips.
you cannot put the window "back on track" the window regulator failed and will need to be replaced, good luck. What kind of lame answer is that? Yours might have been - not everybodies is.
If the driver's door window does not roll all the way up on a 2002 Focus SVT, perhaps the window has come off the track inside the door. The door panel has to be removed and the window cable repaired and put back on the track.
how to put a power window back on track on a 1991 ford f150
Take the door panel off and put it back on the track
If your window has come off its roller you will probably need a new regulator to get it back on the track. Alternatively you can try to fix it by detaching the paneling on your door and trying to get window back on roller.
Remove the inside door panel. The entire power window mechanism will be visible. Put the window back onto the window track.
If a power window goes off track on a 1999 Camaro, the door panel can be removed and the window put back on the cable track. The door panel can be removed by opening the clips on the corners. If there are lights in the door panel, the light covers need to be removed first.
To put a window back on track in a 1996 Geo Metro, the door panel will have to be removed. Use a screwdriver to pry up the clips around the door panel. Then locate the window cable and rewind it. If the window is operated by a power switch, be careful not to pinch the fingers when rewinding the cable.
Remove the door panel. Find the track, for the passage window, loosen the track and put the glass, back in track. Put the track, back in track, and tighten it down. Put your door panel back on, and your ready to go.