It is a fan with a clutch. You have to have clutch wrentches to remove it. The nut that holds it to the water pump is an 1 1/2 nut. You have to hold the water pump pulley from turning and loosen the nut by turning it counter clockwise (as you are looking at it).
Labor costs vary by region for replacing the water pump on a 1992 Ford Explorer 4.0. On this vehicle labor could run about 3 hours because there is a lot of other engine parts in the way that have to be removed to get to the water pump. Labor costs average about $75 to $100 an hour.
what size bolts are in a water pump for a 1007 ford explorer
Inside the fuel tank
need a diagram and instructions on changing a water pump on a 1992 ford tempo 4 cylinder
Fuel Level Sensor in the fuel pump. Replace the fuel pump. ------------------------------------------------------------------------------------------------------- A 1992 Ford Explorer has a 15 amp fuse in location # 17 for the fuel gauge Helpfull
Follow the lower radiator hose from the radiator , it connects to the water pump
The lower radiator hose connects the radiator and the water pump
go to the ford website..........
well you have to take off the front end of the motor and carefully pop out the bolts andthere you go have a great day
( No ) on a 2002 Ford Explorer the oil pump is mechanically driven
i need to look at the book or the page
My 1995 Explorer owner's manual states to have the ignition key in the off position