You need to remove the pulley from the pump to access the bolts that hold it to the bracket. A special puller is needed to remove the pulley and press it back on without damage to the pump or pulley. Most auto parts stores will rent you the tool to do the job correctly.
Begin by removing the belt from your 1994 Chevy Suburban power steering pump. Remove the power steering pump hose. Remove the power steering pump retaining bolts. The power steering pump will come off.
Its has HydraBoost Braked, operates off the power steering pump.
U need to purchase a Chevy power steering pump removal/install tool. its a small pulley type tool and will take the pulley off of the pump. once its off, there should be 3 bolts that hold the pump in place.
Remove the power steering pump hose. Remove the power steering pump belt. Remove the power steering pump retaining bolts. The power steering pump will come off.
To remove the power steering pump from a 1995 Chevy G20, first, disconnect the negative battery cable and relieve the pressure in the power steering system. Then, remove the serpentine belt from the pump by loosening the tensioner. Next, disconnect the fluid lines from the pump and unbolt it from the engine bracket. Finally, lift the pump out of its mounting position.
Answerwell if it is in a 95 you have to take off the coil pack then the power steering pump then take of the bolts on the water pump
To replace the power steering pump on a Chevy Impala, first, ensure the vehicle is parked on a level surface and the engine is off. Remove the serpentine belt by releasing the tensioner, then disconnect the power steering fluid hoses from the pump. Unbolt the pump from its bracket, install the new pump, and reconnect the hoses. Finally, refill the power steering fluid, reattach the serpentine belt, and start the engine to check for leaks and proper operation.
To remove the power steering pump on a 2002 Chevy Malibu, first ensure the engine is off and the keys are removed. Disconnect the negative battery cable, then remove the serpentine belt by loosening the tensioner. After draining the power steering fluid, disconnect the pump's hoses and wiring harness. Finally, unbolt the pump from its mounting bracket and carefully lift it out.
Loosen the tensioner pulley. Remove the power steering belt. Remove the power steering hose. Remove the power steering retaining bolts. The power steering pump will come off.
Bring it to the garage. it is a pain. you have to remove the power steering pump
Replace o ring between tank and pump clips slide off tank
it is under the power steering pump. You need to take the PS pump off the bracket and flip it over on top of the intake.