Want this question answered?
On the bottom left of the instrument cluster, is a button marked 0. Switch ignition on and immediately press the button. Switch ignition off. Press and hold the button while switching the ignition on. After 10 seconds, the new interval will appear, accompanied by a beep. Release button. Switch ignition off.
When the service indicator light is illuminated, hold down the scroll button. The service display will return to 100 percent and the indicator light will off.
how to turn off the service light
The service indicator light, in your Mercedes ML 270, can be reset by holding in the engine oil life button. The engine oil life will go to 100 percent. The service indicator light should go off.
To reset the service indicator. Switch off the ignition. Push and hold the mileage reset button (on the right) switch on the ignition (whilst still holding the button) the display will count down from 10 to 0 when it reaches 0 let go switch off the ignition and switch on the indicator should now be reset.
On a Renault Clio washed car but Rear indicator lights still on and can't turn them off?
the service light will go off after a number of miles..... I believe mine went off after 100 or 200 miles
with the switch off, press and hold the odometer button. Turn the switch on, and the odometer will be in insp mode. mode. Press the odometer button until the indicator shows --- . Turn the switch off and the lamp should be reset.
To reset the service indicator. Switch off the ignition. Push and hold the mileage reset button (on the right) switch on the ignition (whilst still holding the button) the display will count down from 10 to 0 when it reaches 0 let go switch off the ignition and switch on the indicator should now be reset.
As many as you wish, as long as you do cross 200 amp limit
Service indicator reset switch ignition to position 2 press brake & accelerator pedals together for 15 seconds service indicator will flash when reset release pedals turn ignition off hope this was useful Mike 2
Hold in the wrench button on instrument cluster, and at the same time turn your key forward (without starting). While still holding the "wrench" button in, press the "0,0" button and hold until the "SERVICE!" notification clears (about 2-3 seconds). "Service!" Indicator Reset Procedure/Service Indicator Reset Complete!