You need to take apart the entire blaster to get the stock off once you attach it. Just unscrew the screwsso that you can take off the top, and take it out. Then screw the screws back in after putting the shell back on. Stinks, huh?
NO!
Well, you can either file it with a filer or you can you something to pry it out.
Not in less you open it up and take out the locks
there are two ways you can take a longstrike stock out the first one is to take apart the gun and remove the stock or you can mod it by filing or sanding down the front grooves of the stock. you can check on how to do this on youtube. hope this helps.
make sure the orange bolt part is off of the gun and all accessories (except the stock) are off. also be sure you took out all of the screws.
you can but it is hard you have to take apart the gun and pull the stock up and close the gun
The stock can be removed once it is attached. all you have to do is unscrew all the screws on the gun (not the stock) and open it. Then just take the top of and slide it up. but first you must twist the barell off.
The Nerf LongStrike's max shooting range is 35ft with the long barrel on the end but when it is off it shoots about 23ft.
Pry it off with a flathead screwdriver.
You can, although you will have to screw the entire weapon open, take out the stock, and close the weapon again. It's a tough job for a newbie, but someone experienced with taking apart things, E.G, an enthusiast gearhead, should be able to do it.
the Nerf longSHOT is available in Florida. there is no longstrike. the longstrike is not out yet so you cant get it anywhere -superchad456
no the longstrike is much better it has better accuracy and it's easier to shoot so if you're going to buy one the longstrike is definetly the way to go