lock located between the panel and handle. take small screwdriver to pry gap between back of handle and panel. then take another screwdriver push the silver lock ring off the shaft . then handle should slide off
A simple inexpensive tool is available at your local auto parts store. There is a C clip behind the handle that needs to be removed to release the handle.
there is a C shaped clip behind the handle. I have the tool to remove it you can get them at auto zone. you can also use a small pick to pull clip out but watch out it will fling out
Remove inside door handle and window crank handle, remove inside door panel, remove vent window and channel assembly, remove window.
Push in slightly on the door panel around the window crank area. Take a small hook shaped tool (can be made from a coat hanger) and pull out the C shaped clip that pins the handle to the shaft. Pull handle off shaft.
There is a spring clip on the back of the handle that you have to get off before the handle will pull off, go to the parts store and get the special window crank removal tool to get it off.
There is a "C" clip behind the handle that must be removed. Your local auto parts store can sell you an inexpensive tool to help you remove the clip without damage done.
Remove the inside door panel of your 1997 Chevy Lumina. Remove the linkage to the window crank. Remove the window crank retaining bolts. Reverse the process to install the new window crank.
behind the window crank
Window cranks are easy to remove. Go to the local auto parts store, and ask for a window crank removal too. Slip it in behind the crank until it comes free.
The interchangeable part for a 1994 Mustang window crank handle would be a 1991 to 1993 Mustang window crank handle. This part can also be found at some salvage yards for automobile parts.
To replace the window crank handle on the 1993 Geo Prism, first remove the interior door panel. Then, access the screw that holds the window crank in place and remove it. You can then remove the handle itself.
They sell a window crank removal tool to open the cotter in and slide off the winow crank handle. Slide the tool under the window handle and push the cotter pin back, off comes the handle