To access the fuel pump on a 2004 Toyota Sequoia, you typically need to remove the rear seats and the floor covering to reach the fuel pump access panel located above the fuel tank. Unscrew the panel and carefully disconnect the fuel lines and electrical connectors before removing the fuel pump assembly. If you prefer, you can also drop the fuel tank for easier access, but this is a more involved process. Always ensure to relieve the fuel system pressure before starting any work on the fuel pump.
in the fuel tank
It is inside the fuel tank.
Had same trouble with my 04 Sequoia.. Flushed and change transmission fluid and had no more trouble..
Mounted on top and inside the fuel tank.
For the 04 it is an integral part of the fuel pump assembly which is located in the tank. I think you can access the tank by removing the back seat, but you might have to take the tank off.
The fuel filter is in the gas tank on the end of the fuel pump.
It is part of the fuel pump module in the tank.
Sequoia Throne was created on 2008-04-25.
Unfortunately, it's located inside the fuel tank. FriPilot
You have 2 choices. You can remove the fuel tank, or you can unbolt the bed and move it back far enough to access the pump.
Maybe fuel pump or dirty injectors
Because the fuel filter is located inside the fuel tank and is part of the fuel pump module. The fuel filter by itself is not serviceable.