You have to unbolt the upper plenum and remove the intake hose from the air filter. Once all mail bolts are loose you can move it up enough to easily change the plugs and wires. There are about 4 plugs you have to unplug too, just to forget to tighten everything down good and plug in the four wires you unplugged. goodluck!
How can remove the rear seat on a 1990 mercury sable
The 2000 Mercury Sable starter can be found on the right hand side of the engine. The starter will be near the back of the engine.
This is a front wheel vehicle. That means that the engine is side ways, So the ones that you found were surely in the front. The other three are going to be on the back side of the engine. One way I try finding them is notice the wires going to the ones you found. Now look on the back side of the motor for three similar wires and follow the to your spark plugs
In the back of the engine.
NONO
The 2001 Mercury Sable PCV valve can be found on top of the engine. The PCV valve will be on the back side of the air cleaner housing.
on the back of the engine u have to remove the intake to get to it
how do I get to the plug at the back of the power outlet/ ash tray 99 sable
The horn relay for a 1998 Sable is on the back of the distribution block. The block is under the dash on the drivers side.
A transfer case is used if a vehicle is all wheel drive or 4 wheel drive capable and is located at the back of the transmission . In a 2000 Mercury Sable the " transaxle " is bolted to the back of the engine towards the drivers side
The transmission dip stick on a 1994 Mercury Sable is located on the driver's side of the motor. It has a white-handled ring and it is about midway between the radiator and the back fire wall.
You can remove the motor mount and roll the engine froward or get an socket wrench and a long extension and spark plug socket will do the trick very tight squeeze but is possible with out removing anything at all