Plaster ceilings are difficult as the plaster was applied to a series of small wooden slats that were attached to your studs. A stud finder is of no use here. My suggestion is to try and measure from the ceiling light fixture if one exists as it should be attached to a stud. The standard distance for ceiling studs is 16" apart. Use the back of a screwdriver to tap and notice the change in sound to determine if a stud is located there. You will probably need longer screws because you will be adding another 1/4" to your calculation. Most pot racks come with instructions for installation and if any further problems arise then talk to your local hardware store.
The standard placement of a pot rack is hanging from the ceiling. This type of rack was designed to hang over the stove so the pots are easily accessible.
pot luck, without knowing exactly where wires in ceiling are, can easily drill through heating wire.
Depending on the pot rack and your location, to have a ceiling pot rack installed would cost around $200. If any electrical work is required, it would cost more.
The rack's weight should be balanced whenever possible, both for proper support and to keep the rack from swinging as you access the pans. If the rack has multiple chains or other hanging points, hang each from separate hooks, rings or bolts. Before you start, you might make a template to mark the exact hanging points on the ceiling or wall. Be sure to check for adequate support before proceeding with the installation.
The website www.kitchensource.com has ceiling pot racks available for purchase. Also, the website crateandbarrel.com has a lot of great pot racks available for different prices.
The biggest selections on ceiling pot racks can be found on Amazon, Google Products, and Ebay. Dont forget to check craigslist once you find a specific rack you want.
Only if the ceiling hooks go through the ceiling and into the rafters above. In practice, this means at least four inch lag bolts. Toggle bolts won't do the job. - even if nobody is hurt when the rack comes down, the ceiling will be ruined and the noise will be enormous.
Adequate space in the kitchen is often at a premium for many homeowners. One creative and attractive way to gain usable space and help with clutter would be the addition of a hanging pot rack. As these are quite heavy and large, it is extremely important that the rack be securely mounted. This can easily be done by most homeowners. If unfamiliar or uncomfortable with the mounting, it is recommended that it be professionally installed to ensure safety.Choosing the Right OneThe first step is to obviously decide on the rack that is going to be purchased and used. Since the rack and hanging pots and pans will be a large and prominent fixture in the kitchen, it is essential that it is one that is a attractive and matches the overall decor of the room. There are options and plans available where the homeowner can make a hanging pot rack. If this method is used, one needs to ensure that the rack is completely sturdy. By purchasing a pre-made rack, one will ensure that it is going to be durable.Finding the JoistsBefore the rack is mounted, studs or ceiling joists will need to be found. A stud finder will make this job the easiest. The rack needs to be installed onto these secure boards. For the installation, the rack will need to be hung on one joist or two. If a rack has two mounting points, it can easily be installed on one joist. For larger racks that have four mounting points, this may need to be installed over the span of two or even three ceiling joists.Securely MountingOnce the joists are found, points should be marked on the ceiling where the hooks will be attached. Most racks attached with a simple screw style hook. This should be screwed completely into the ceiling joints and repeated for each one. The rack can then be placed onto the chain and hooked to the ceiling. It should hang level and even.Once the path rack is securely hung in place, all that needs to happen would be the addition of the pots and pans.
1st you convict them of a capital crime. The rest is up to the appeals courts to decide. In addition a swag hook comes to mind.
One can make a pot shelf or rack in many different ways. The easiest way would be to get scrap pieces of wood and put them together in the form of a rack.
There can be several common safety issues involved when one is installing a hanging pot rack. The primary safety issue would be hanging a pot rack on a surface that cannot support the weight. Another issue would be pots falling from the rack and causing injury.
You can use a old towel rack or even a old wooden ladder and take out the beams, you will just need to get screws to keep it on the wall, also if using the ladder u could put the screws in at the point you want your pots to hang