Use a series parallel configuration. Two batteries in series to get the 12 volts. Three parallel banks of two batteries to get an increase of amp hours.
You can hook up an infinitive number of 12 volt batteries in a parallel circuit and still have 12 volts.
NO. Absolutely not, you must hook them in parallel. Two 12 volt batteries hooked in series will give you 24 volts with the same A/H of one of the batteries. Hook them in parallel and you will still have 12 volts and double the A/H of one of the batteries.
You must hook them up in series. You will need four 12 volt batteries to do this.
Two 6 volt batteries connected together in parallel will still maintain 6 volts but their amperage capacity will be doubled.
You hook them in parallel pos to pos and neg to neg.
Yes, you hook them in parallel. Pos to pos, and neg to neg.
Yes, connect them in Parallel. You will still have 12 volts but the amperage will double which is fine.
Hook then up in Series. Positive to negative. You then have 24 volts but the same amperage of one individual battery.that will short out other battery
positive (red wire) to positive post (+) negative (black wire) to negative post (-) positive (red wire) to positive post (+) negative (black wire) to negative post (-) posiItive (red wire) to positive post (+) negative (black wire) to negative post (-) If you want the batteries to provide the same voltage but more current, hook them up this way. If you want the voltage increased but the current remain the same, hook the up with negative post to positive post and so on, until the voltage is what you want. For example using regular flashlight batteries of 1.5 volts, the first way, using only two batteries, you still have 1.5 volts but the batteries now will last twice as long. Using the second way, the batteries last only just as long as a single battery but you have 3.0 volts instead.
You would need to connect the two 12 volt batteries in series. That will give you 24 volts and the amps of one of the batteries. Voltage doubles and amps stay the same.
Hook all the positive poles together, and all the negative poles. This is "parallel" wiring, and it increases the amps rather than the volts.
You get 3 of them and hook them up in series. Then you can connect them to the 36 V battery.