4 wire household wiring is black, red, (hot wires) white (neutral) and bare or green (ground wire). You say 3 wires. Is it 120v or 240v. If its 240v which is more common just use the two hots and the ground and cap off the neutral wire.
It is a circut breaker.
Yes. You can wire more than one gfci to a circut.
Hi there, I also have a test coming up. The only thing I can think of is inputs! Sorry :( :(
no
I have a Hunter ceiling fan that is operate's by remote only, I have a red wire coming out of the ceiling where do I hook that wire ?
Steel spoon
Electricity does not flow in an open circut
It is a circut breaker.
Yes
No. A circuit must have a switch, a source and something to receive the electricity.
to hook up the tach use the hot lead on the disributor and to any good ground wire and if there is a light hook it to the wire on you light switch
To hook the bottle on to the cage, you place the wire horizatally close to the middle of the bottle and wrap each end of the wire to the bars of the cage.
No. Hook up the power wire first, then the ground wire. The ground wire is what acutually draws the power to the unit. As you will notice the power wont turn on if just the power wire is plugged in..
Hook up the red wire to the fuse box or another wire that gives power when the key is on. Hook up the white wire to a wire coming out of the headlight switch. This will make is so that when you turn your headlights on, the light will come on on the tach. If you don't mind the light on the tach being on all the time then just hook it to another power wire. Hook the black wire to a ground like a screw or a bolt. The green wire is the signal wire. Run it through your fire wall. Hook it up to the negative side of the coil. There will be a negative sign on the coil denoting the correct side.
the purple wire
Yes. You can wire more than one gfci to a circut.
Cut off the eye of the hook with some wire cutters and then pull the hook through.