0
How do you hook up a aftermarket radio in a Chevrolet Cavalier?
Wiki User
∙ 12y ago
Depending on the year you need a certain chip which will plug into the back of the stereo. The chip controls the sounds the vehicle makes on the inside ( dinging chimes etc. ). The chip will run you about 80$. After that it's all plug and play.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Does a 2000 Chevrolet Cavalier have RCA jacks in the factory radio?
no if you wanna hook rcas up to it you'll have to hook up a line output converter
Where do I hook up the orange wire when installing an aftermarket radio in a 1991 dodge Dakota?
that wire is for the radio dimmer. when you turn on your headlights the radio dims so your not blinded at night. Some aftermarket stereos have a place to hook this wire up and some don't.
Why i haveNo sound after hooking aftermarket radio in 99 intrigue?
if you have the Bose system you might need to hook up the aftermarket amp wire to the factory amp
How do you hook up the antenna cable to an aftermarket radio in a 05 Nissan altima?
you must go to wal-mart or any other store and by the adapter wireing kit for that car. Most foreign cars need adapters to hook up to aftermarket stereos.
Where is the radio harness that you can hook your aftermarket radio into?
Usually when you get the radio the place you bought it will have a wiring harness that will fit the car. If not then go to a radio installation shop and ask for one. This will then plug right into the factory car harness and then you connect the radio to this harness. That's it. Good luck.
How do you take windshield wipers off a 99 cavalier z24?
The 1999 Chevrolet Cavalier has the most common hook-end wiper blade arms. See installation videos in related links below. Find a button or tab in the area where the wiper blade is inserted into the hook. Press the tab and pull wiper blade out of the hook. Sometimes you have to rotate and flex the wiper a little bit to make enough clearance for the hook to pass through.
How come three of the four speakers in my 1988 Chevrolet Celebrity are not working?
if u have access to speakers turn on radio balance speaker control on radio ,hook a good speaker to each wire if it work check the radio
How do you go about wiring an aftermarket sound system in a 1994 cadillac deville considering the stock amplifier?
first don't remove your stock stereo if u havn"t already. The radio works with the carscomputer to reset codes and other stuff. you can get an adapter that turns your speaker wire on the back of the radio into left and right channel to hook up to an aftermarket amplifier. then hook up your new speakers and sub woofer to the amp and use the stock radio to get your grove on. or install an after market radio in the glove box or middle console but don't remove the stock radio. get rid of the stock amp not powerful enough.
How do you hook up a CD-radio-tuner in a 1997 Mercury Mystique?
IF ITS AFTERMARKET:.... REMOVE THE OLD CD-PLAYER/RADIO....GO TO CIRCUIT CITY OR ANY AUDIO STORE AND ASK FOR A HARNESS TO FIT YOUR CD/RADIO PLAYER TO YOUR SPECIFIC VEHICLE.... THEN PLUG AND PLAY THAT SIMPLE...
How do you hook up aftermarket stereo in 1977 Lincoln?
on factory wire harnes, there are 5 speaker wires. 4 are (+). on speakers, but only one (-). when i hook up aftermarket head unit do i hook up all negative speaker wires together
How do you hook up a 6 disco CD changer to an aftermarket CD player?
It depends on the make/model of the CD Changer. Most aftermarket headunits have a compatible manufacture made changer. If you do not have a compatible unit you can purchase an FM Modulator for that changer. The modulator takes the signal and broadcasts it over a radio frequency.
How do you change the wipers on a 2001 Cavalier?
The 2001 Chevrolet Cavalier has hook-end wiper arms. See the Sources and Related Links section below for wiper blade installation videos and correct attachment/length wiper blade sizes. Also, if you purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through. Very simple.
