Want this question answered?
the capacitor starts the compressor generally if it don t work the compressor usually won t start
the start relay helps the compressor start up then takes itself out of play when the compressor gets going. The older units will have a capacitor and a relay mounted in the control panel and the new ones are all in one...you just parallel the run capacitor.
No.
Do you have a dual capacitor that starts both the compressor and the fan motor? You need 230V to power the compressor. You should have one wire from the capacitor going from the start terminal on the compressor and one going from the common terminal to common on the capacitor.
yes you can but, the compressor may not run as well and the capacitor may smoke and break if the compressor runs for an extended period of time so, make sure you check it the first couple of time you use the compressor.
acu compressor motor window type aircon 45 uf capacitor for 2.5 hp compressor 50 uf for 3 ton acu 60 uf for 1.5 hp compressor 35 uf
You probably will need to put a valve on that compressor unless it has a port already. Then you hook up your guages and check the pressure. Do you know if the compressor is running or not?
Not likely
The compressor capacitor probably is going bad, or maybe the compressor will need a start capacitor and a potential relay.
An AC belt hooks up to an 1987 Nova by wrapping around the AC compressor. It is then reattached to the compressor by tightening the bolts back down to the belt.
3100y20q800cl
5/50mfd