0
How do you hook up a universal 4 wire oxygen sensor when the OE was 3 wire?
Wiki User
∙ 12y ago
get the right oxygen sensor
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you replace the oxygen sensor on a 2001 Honda Accord?
First unhook the battery. The oxygen sensor is in the exhaust manifold, so do this when the engine is cold. Disconnect the O2 sensor wire at the connector, screw out the old sensor, dab some antiseize on the threads of the new one and screw it in, then connect the wire and hook the battery up.
Where is the oxygen sensor signal wire on a 97 GM?
I think its the purple wire coming from the Oxygen sensor!
What color is the signal wire on a Bosch 15733 universal oxygen sensor when installing it on a 1997 Mazda mpv?
The black wires are the heater wires, the white wire is the signal wire and the green is the ground wire.
What wire do you hook into your o2 sensor it has 4 wires im trying 2 hook up an air fuel mix gauge?
the purple wire
What are the wiring color code for the oxygen sensor on a 2000 Saturn SC2?
The downstream O2 sensor was broken and is missing the wiring harness, I have a universal O2 sensor, but need the color codes to wire it properly. It has a purple, pink, black and white.
What wire do you hook to on the o2 sensorto install a air fuel gauge on a 93 Honda civic?
you hook it up to the white wire that comes out of your O2 sensor
Where is the Oxygen Sensor Signal Wire located in a 1996 Acura Integra?
The oxygen sensor is connected by a wiring harness. The wiring harness contains the signal wire. The signal wire goes to the system computer.
How to Match the color on the oxygen sensor with a replacement sensor?
There's no universal color code for oxygen sensor wiring. Buy the right sensor, period. If you're buying a generic sensor for your car (possible, but there are still many different kinds) and need to splice the wires from the new sensor to the car, usually the black wire is the ground and the other wire is "hot." With three-wire sensors, try to find a wiring diagram online to match up the colors. It's risky using a voltmeter or test light to find the hot wire(s), because you could fry your computer.
Diagram for a 2001 volkswagen jetta 2.0 brake sensor on how to change it?
wire for brake sensor just loose where does it hook to
How do you replace the O2 sensor on a 96 Saturn SC2?
Cut the wire, unscrew the old oxygen sensor then replace it with the new one and finally, connect the new wire, making certain that you follow the manufacturers wiring diagram. To find the oxygen sensor, look at the exhaust manifold, then follow it down to where the manifold feeds into the headpipe. The oxygen sensor is the part that screws into the exhaust and has a wire connected to it.
Where is the engine ground wire mount for the oxygen sensor on a 1988 Chevrolet Corsica?
the oxygen sensor is grounded when you thread it into the exhaust manifold the oxygen sensor should have only 1 wire it should be purple the didnt start putting 2 or 4 wire sensors in until the early 90's there should be a ground from the battery to the block
Where is the oxygen sensor in a 1992 Buick Skylark?
the oxygen sensor is located in/on the exhaust manifold.it looks like a spark plug with a wire coming out of the top
