I don't know where it is loose, get a manual on your car.
you don't. they are two entirely seperate systems.
You are possibly referring to the emergency or parking brake cable. This hooks to a pedal or lever in the drivers area.
The emergency brake system is a cable-actuated system that only controls the rear brakes of the vehicle. Adjustments are sometimes necessary as are correct linkage hook-up. To inspect if system is working at all you can remove rear brake drums and check. A model-year specific manual from an auto parts store covers all of this in better detail.
if you have a plug on the back of your truck then there is a blue plug over top of the emergency brake pedel on top of the 50 way wire harness and your truck should have came with the plug for the electric brakes in the glove box and the wires are marked as to where they go where you hook them to your trailer brake controller i hope this helps you Allen if you have a plug on the back of your truck then there is a blue plug over top of the emergency brake pedel on top of the 50 way wire harness and your truck should have came with the plug for the electric brakes in the glove box and the wires are marked as to where they go where you hook them to your trailer brake controller i hope this helps you Allen
They are shaped to fit tight against back of the pad.
i need to hook up the video wire so i can play dvds. i need to bypass the parking brake. how do i hook up the wires to bypass the brake issue
Tristan Hook was born on April 12, 1983, in St. Petersburg, Florida, USA.
wire for brake sensor just loose where does it hook to
If you want the parking brake to work, yes.
If equipped, it is under the dash directly to the left of the brake pedal. It is a blue connector.
The 2001 Mercury Grand Marquis has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
The 2006 Mercury Grand Marquis has the most common hook-end wiper arms. See Sources and Related Links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.