0
What else can I help you with?
How do you hook up trailer lights on a 2003 gmc sonoma?
To hook up trailer lights on a 2003 GMC Sonoma, first locate the trailer wiring harness connector, usually found near the rear of the truck, often under the bumper. Use a wiring adapter that matches your trailer's plug type (typically 4-pin or 7-pin) and connect it to the harness. Secure the connections and test the lights to ensure they are functioning properly. If needed, consult your vehicle's manual for specific wiring diagrams or troubleshooting tips.
Is there a fuse for trailer lights on 1995 gmc pickup?
Yes.
2002 gmc seirra tail lights on trailer doesnt work bt rest work finr?
check the fuse in the underhood fuse box. There are separate fuses for the trailer turn circuits and tail lights. If the fuse is burnt, replace and reconnect the trailer. If the fuse blows again, check the trailer wiring for a short on the park light wire.
What are possible solutions if trailer brake lights don't work on 2005 GMC Canyon?
Check fuses, check bulbs, check connections.
Where is the wires to hook up a trailer light kit on a 94 GMC jimmy?
I have the 95, and they are located between the bumper and spare tire under the vehicle. Mine were stuffed in there.
When you plug your boat trailer light to your 2006 GMC sierra the lights on the trailer will not come on if you use another truck the lights will work where do you look is it a fuse or a circuit break?
Trailer Lights Work on Other Vehicles but Not MineIF the lights [tail, turn, and brake] are working on your vehicle, AND the trailer lights will work on some other vehicle, that confirms:That the problem is NOT in your vehicle's wiring system.That the problem is either in the trailer wiring, OR is caused by the IMPROPER connection of the connector plug wires to the wiring of your vehicle.It is critical that the connector plugs [on the vehicle and the trailer] are properly connected to the correct wires.The fact that NONE of the lights work when connected to your truck suggests that the defect is related to the GROUND wireas that is the only wire common to all the different light circuits.
Don't have tell lights on GMC?
If you do not have working tail lights on your GMC vehicle it may be an issue with the wiring or your lights may be burned out.
How do you troubleshoot for gmc jimmy back up lights?
how to trouble shoot for gmc back up lights?
What is the plug on the bumper of m2008 sierra how do you use it?
The plug on the bumper of a 2008 GMC Sierra is typically a trailer wiring harness connector, which allows you to connect a trailer's electrical system to your vehicle. To use it, simply remove the protective cover from the plug, align the connector from your trailer's wiring harness with the plug, and push it in until it clicks securely. This connection enables the trailer's brake lights, turn signals, and running lights to function properly while towing. Always ensure that the vehicle's electrical system is compatible with the trailer's requirements before use.
Your brake lights quit working on your 1996 GMC Z71 truck and The brake light switch and harness have been replaced but they still don't work. Also my hazard lights and backup lights don't work either?
If there is a trailer wiring harness on the vehicle for towing unplug harness under drivers side rear tail light to eliminate the trailer wiring that's probably the issue then plug factory wires together
GMC JIMMY why are your dash tail and parking lights not working but the brake blinker and head lights work fine?
The GMC dash tail and parking lights are on a different fuse from the brake lights. Check the fuses for a possible blown fuse.
Will 1982 GMC half ton wheels fit 1976 GMC half ton?
Yes
