Want this question answered?
Tire information is the data regarding size, loading, plies and speed rating that is usually embossed on the sidewall of every tire.
Tread is 195 mm wide. Sidewall is 60 percent of 195 mm tall. R is radial tire. 15 inch rim. H speed rating.
Say you have a tire size 205/60HR16:205 is the section width of the tire in millimeters. Section width is the overall width from sidewall to sidewall. Tread width is typically 90% of the section width. In the above size, the section width is 205mm.The second number is the aspect ratio. This is the percentage ratio of the sidewall height to section width. In the above example, the sidewall height is 60% of the section width.The last number is the wheel diameter in inches. So in the above example, the wheel diameter is 16 inches.The R in the size designation means the tire is a radial tire, as almost all car tires are. The letter in front of the R (H in the above example) is the speed rating of the tire. The speed rating is the maximum speed the manufacturer recommends for the tire.
The proper pressure depends on the tire itself. The recommended tire pressure is stamped on the sidewall of the tire beside the load rating..
A 1999 Hyundai Accent tire pressure would normally be 32 pis. The tire has the rating stamped into the sidewall.
Can you? Sure you can, but I would not recommend it. Air is leaking through the plies of the tire and bulging the sidewall. This has caused the sidewall to separate from the carcass of the tire. This will eventually leak to complete separation of the sidewall and tread as time goes on. My advice is to replace any tire with a bubble on the sidewall. This is a defective tire that you do not want to drive at highway speed on and risk an accident. I built tires at a General Tire plant so I have knowledge of how they are built and I would not drive on this tire.
It is the maximum speed your tire is made for. It is indicated by the last letter on the tire designation. - eg, 215 65 R15 95 H - the H is speed rating.
Correct tire pressure will vary from tire to tire. The recommended rating for tire pressure will usually be printed in small letters on the sidewall of the tire with a number followed by the letters "psi."
Check on the inside of your drivers side door. It will tell you Chevy's Factory recommendation. The tire will also have a max PSI rating on the sidewall somewhere. I ALWAYS go with the PSI rating on the TIRE
That would be the 255.a typical tire p195/60r16* P - Type of tire * 195 - width of the tire across the tread in millimeters * 60 - Aspect ratio of the sidewall compared to the width * R - Radial construction * 16 - Diameter of the rim in inches * 63 - Tire's load rating * H - Tire's speed rating * M+S - Tire is suitable for all-season driving
Get a tire with a speed rating of S or T.
108=the load rating per tire is 2205 lbs S=the speed rating on this tire is 112 mph