to increase the turn of the coil
ANSWER: Nobody can increase the current of a coil it actually losses power because of IR drop. from the source to the final output will always be less unless the current is amplified by an active device like a current amplifier where the power is from another source.
Move the wire rapidly to increase the voltage.
we have to increase the winidin count of Coils inside the Alternator and also the Carbon mesh brush is to be increased so that the higher electric output will be produced................
With a constant voltage and increase in wire length will increase the end to end resistance and therefore the current will decrease.
More current in the field coils means a stronger magnetic field for the armature to rotate in. This causes the output voltage for a generator to increase. For a motor, more magnetic field means that the supply voltage can be matched at a slower armature rotation speed, so the motor runs more slowly but can supply more torque.
Electric motor, the alternating-current alternator, and the rotary converter. A basic dynamo consists of a stator wound with copper coils and a magnetic armature. As the magnetic armature spins it induces a current in the copper coils.
delivered current during defibrillation is expected to increase with which of the following?
The strength of a magnetic field produced by a current carrying wire increases proportionately with the current through the wire, and it dies off as the distance from the wire decreases. To increase the magnetic field around a coil you would either increase the current running through it (by increasing the voltage and/or using a less resistive wire), increase the number of windings, or wind the coil more tightly (bring the windings closer together). The latter solution doesn't increase the overall magnetic flux produced, but it does make the coil more compact so the flux "leaks" less.
Think of the four C's- Add more Coils- Add an iron Core- Add a stronger Current- Make the coils Closer
Increase the size of the magnet. Increase the current passing through the wires (electromagnets) Increase the number of coils of the wire (electromagnets)
well if you doubled the coils it would be pie times the amount of voltage in the current squared
Increasing the number of loops per meter in the coils of a solenoid is one way to increase the wire's electric current.
elect flows troo the incoming wire to the meter and energise the current coils and the volt coils resulting in eddy currents and thus moves the disk to the amount of flux produced...........
there are 3 ways,*changing the number of coils of wire,*changing the current in the wire,*changing the material used for the core.sidenote - i just saw this answer and its perfect, really. simple and just the three points i needed for homework!how could you make them stronger
Adding more coils will make the magnetic field stronger. Magnetic field increases.
I would expect a voltage in both coils of wire.Note that, if the two coils are connected, the voltages (and corresponding currents) in the coils can interact. Also, if the two coils are NOT connected, they can STILL interact, since a current will produce its own magnetic field.
we have to increase the winidin count of Coils inside the Alternator and also the Carbon mesh brush is to be increased so that the higher electric output will be produced................
And the amount of coils.
No, you is false. Increasing current does it, but the number of turns in the coilalso must increase if you want to increase the magnetic field that way.