To install a 2000 Yamaha Waverunner XL 1200 starter, first remove the 2 bolts. Then the wires connected to the starter. Remove the starter and replace with new.
How many horsepower is a 1200 Yamaha Waverunner horsepower rated at
water while it running may be head or base gasket
1998 1200 yamaha vmax
It's a real pain. I had to bend the head of a wrench to get at one of the 4 bolts holding it in. If you have the engine out, it's real easy. A lot of times the starter is the not the problem on these bikes. The starter bendix that is behind the clutch is the problem if you hear grinding when you try to use the starter.
how to adjust carburators on Yamaha fj 1200
The Yamaha 1200 motorcycle seat is held in place by four retaining bolts. Remove the retaining bolts and the seat will come off.
Hi - Having same problem. Did you find out how? I have the bolts out, but starter won't come. Does the clutch assembly have to come out first? I have LS2000 jet boat that has the same motors as the XL 1200. I also tried to remove the starter (3 times) before getting it off. The starter clutch assembly does not have to come off, the starter will slide out of the hole in the crankcase it is set in but it is hard to do. There is an o-ring on the shank of the starter that goes in to the hole in the crankcase, this why it is so hard to remove. You have to use a chisel or a large screwdriver and hit the front of the starter drive out. Putting it back in is almost as hard.
Too much
Depends on what model and where you live? Mopeds are worth less in more rural areas and worth the most in any city...in excellent condition...Yamaha chappy- 500-1200$, Yamaha qt50 200-750$, Yamaha Towny 400-900$, Yamaha champ 500-1200$, the more rust and the more plastic the bike has on it the less its worth...
coil is bad
.035 gap
diagram oil injection system xlt 1200