you disconnect the heater hoses and see where the connect into the fire wall you may have to take the complete dash out or simply take out the glove box
How do you replace starter on2.3 cy 1991 pontiac grand am
In a 1991 Pontiac Grand Am : According to my Chilton's Auto Repair Manual : ( 13.6 U.S. gallons )
Begin by removing the positive cable from your 1991 Pontiac Grand Am battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.
=== === === ===
The fuel pump on a 1991 Pontiac Grand AM is located within the engine bay. Fuel pumps can come in both mechanical and electrical formats and is connected to the fuel lines on the vehicle.
The 1991 Pontiac Grand Am gets 19 miles per gallon in the city, and 30 miles per gallon on the highway. It can hold up to 13.6 gallons of gas.
Side post battery
You must remove the fuel tank.
It's in the tank.
all the spark plug wires are on it
nope, just radio buttons if you have that option like i do.
The 1991 Pontiac Grand Am radiator drain plug can be found on the bottom of the radiator. The radiator drain plug will be in the center of the radiator bottom.
i got a 1991 grand am it is a 5 speed i need to no where to fill it
It's not a bug, it's a feature.
The fuel pump is located inside the gas tank.
To install a new heater core in a 1991 Camry, the passenger side dash has to be removed. After access is gained to the heater core, the old one needs to be taken out and a new one put in, replacing all of the wires and hoses.
The 1991 Pontiac Grand Prix oxygen sensor is located on the outside of the air filter housing. You will find the sensor on the back side of the air filter housing.
Remove the water from the cooling system. Remove the water lines from the heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
Drain the water from the cooling system. Remove the water hose from the heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
Heater core leaking.
You don't. In the 1991 Pontiac Grand Am, the wheel/hub assembly is pre-built at the factory and as such, can not be disassembled for maintenance. If you are having trouble with lubrication or worn bearings, you must replace the entire assembly.
mine came from the factory without one I had to get the parts and install one , but the answer : it is suppose to be at the end of the vac hose on the top of valve cover where the hose goes into the cover I had to buy the grommet and a pcv valve
You do not need to completely remove the dashboard in order to change the heater core. Remove the water hoses from the heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
Have you checked the timing? It could be that or something else wrong with the ignition system.