Want this question answered?
Antifreeze is used to heat the cab of your vehicle. When you turn on your heat in your cab, it opens up a valve that allows the hot antifreeze to flow from the radiator into the heater core. If there is a leak in the rubber tubes that flow into the heater core, or if the heatercore is damaged, you will smell the antifreeze in the cab of the vehicle. You may need new hoses to the heater core and/or a new heater core.
A cabinet file, extension .cab, is a compressed archive file. Windows has built-in functions to open or extract the cabinet file but not to install it. A specific command must be entered through the pkgmgr program to install the cab file.
up to 1992 models, you remove the heater box from inside the cab, uncouple the hoses at the firewall (under the hood) and wiggle it out (from the cab).
Lower left side under the steering wheel a few inches above the cab floor.
if antifreez is blowing into cab, u need to replace the heater core the core has a hole in it. thses are not repairable and they are cheap to buy
under dash on passenger side inside the cab
I'm sure you are talking about the passenger side. The heater core must be leaking. That is the only thing that will allow antifreeze into the cab. Check and make sure that the heater hose's that clamp to the heater core out under the hood is tight. If they are then replace the heater core.
how to install a ac housing on a 2007 dodge ram 1500 , mega cab hemi
Yes, it can.
go to skype.com download the CAB file put it on your device and then install
REMOVE GLOVE BOX, REMOVE ACCESS PANEL ON HEATER CASE, REMOVE HOSES, REMOVE HEATER CORE. REVERSE PROCEDURE TO INSTALL. AVG TIME 1/2 HOUR.
In a normall cab pickup the subwoofer would be installed in the truck bed.