Want this question answered?
remove transmission, remove rear main seal, install new rear main seal, install transmission.
Disel engines on NPR with sheet metal valve cover takes one type of tool to install rear main seal , but if you have cast aluminum valve cover is a different tool wich are very expensive , try to rent the tool other wise will be very difficult to accomplish I hope this help.
Not really, you need to drop the oil pan to get to the rear main. You may be able to install a new seal by dropping the cap for the rear main. You may have to loosen all the main caps and pull the crank down just a bit. Install the seal and re-torque the main caps.
remove the transmission pry the old seal out and install the new one. piece of cake
ONE PART SEAL IN THE OF THE TRANMISSIOM OR TWO PART SEAL IN THE OIL PAN I DONT KNOW
You can replace the rear Main seal on the oil pump of your Dodge ram 1505.9 L pickup truck by removing the camshaft bearing. Once the bearing is removed the seal can be removed with a seal puller. Reverse the process to install the new seal.
Not enough clear information ! - Rear main seal on WHAT - ? ?
Yep, they have one. 1986 and older has a two piece rear main seal. 1987 and up has a one piece rear main seal.
how do you change a rear main seal in a Chevy 350 motor
You can either pull the engine out or remove the transmission and flywheel to install the rear seal. It slides over the back of the CRANKSHAFT on the back of the engine. Must remove 1 or the other to replace seal.
1. Remove Axles 2. Drop Transmission 3. Remove Old Rear Main Seal w/ Miller Tool 4. Install New --Mechanics usually charge around $1000 to replace this single seal--
a lot of work. the transmission has to be removed.