Run the top half of the belt through the fan blades, rotate the fan 180 degrees, then pull that half back through the fan blades.
Go around the crankcase pulley and the camshaft pulley, go under the tensioner pulley, over the AC compressor pulley, under the idler pulley, and back over the crankcase pulley.
You'll need a 1/2" drive ratchet or breaker bar to adjust the tensioner.
How do you install an alternator belt on a 1986 GMC s15 pickup truck
I need a diagram for a toyota camry le serpine belt please
How to remove and install the serpentine belt on 1991 Chevy Blazer with AC?
HOW DO I INSTALL A TIMING BELT ON A 4D56 ENGINE
Need diagram of belt installation of 1997 Chevy Suberban 5.7L.
Observe how the belt runs around the pulleys then take a 1/2" ratchet and insert it into the belt tensioner( on top near shiny pulley) and pry back the tensioner. Simply remove old belt and install new one. You will be surprised how easy it is. I hope this helps you. Mark
how do you install a serpentine belt on a 1996 corsica?
remove clutch cover. remove old belt. install new belt.
You install it
how to install a serpentine belt on 1989 f250 diesel 7.3l
You should not have removed the tensioner to install the belt. It has a pivot point that and can be moved in order to release the tension on the belt. Once you install the new belt, leave it off the tensioner until last, pivit it and install the belt oner the tensioner.
Remove and inspect the belt(s). Inspect and replace idler pulley's or belt driven accessories that don't spin smoothly and quietly by hand with belt removed. Re-install belt and adjust to proper tension. Be sure the battery tests good and is fully charged.