Motor
Where is the thermostat located in a 2001 Mazda mpv
To uninstall the thermostat on a 2001 Mazda Tribute, first, ensure the engine is cool, then drain the coolant from the radiator. Remove the upper radiator hose connected to the thermostat housing, unbolt the thermostat housing, and take out the old thermostat. To install the new thermostat, place it in the housing, reattach the housing, and reconnect the radiator hose. Finally, refill the cooling system with coolant and check for leaks.
To change the thermostat in a 2001 Mazda MPV, start by draining the coolant from the radiator. Next, locate the thermostat housing, which is typically found near the engine block, and remove the bolts holding it in place. Take out the old thermostat, clean the mating surfaces, and install the new thermostat with the correct orientation. Finally, reattach the housing, refill the coolant, and run the engine to check for leaks.
Take it to a Chevy dealership.
It should be inside the housing where the top radiator hose connects to the engine.
The thermostat on a 2001 Mazda Tribute is located in the engine compartment, typically on the engine's front side, near the top of the engine block. To access it, you usually need to remove the upper radiator hose, as the thermostat is housed within the thermostat housing connected to the engine. Always ensure the engine is cool before attempting to locate or replace the thermostat to avoid burns or injuries.
you blow it up
Drain the water from your 2001 Chevy Corvette cooling system. Remove the water supply hose from the top of the thermostat housing. Remove the thermostat housing retaining bolts. Remove the old thermostat. Reverse the process to install the new thermostat.
It is located on top of the transmission underneath the thermostat. Where the shifter linkage attaches to the transmission.
it is underneath the air filter housing,look for the large coolant hose
Thermostat may not be opening
Temp sending units in general (not always) are usually found close to the thermostat.