Well, the rear is easy, jack it way up, remove rear tires, put jack stands under frame, disconnect the shock, and let the sling push the axel down, remove the spring and add the spacer and replace the spring, making sure it is seated well in both top and bottom spring cups. The front is more difficult, need to remove sway bar link, ball joint, and disconnect the strut. Then push the control arm down, remove spring, add spacer, replace spring and I suggest placing a jack under the control arm to push it up back into place and put it all back together. Hope this helped.
Normally you Install with the spring down.
The Tracker was created in 2002.
You will need to remove the tire and wheel from your 2002 Geo Tracker. Remove the end of the axle. Remove the wheel bearing nut. Remove the wheel seal and the wheel bearing. Reverse the process to install the new wheel bearing.
no there is not a factory tow package for the tracker, any tow package that you put on your tracker you will also have to install a transmission cooling system so you do not fry your transmission and damage your transfer case, you can get one at your local uhaul company.
Shark Tracker - 2002 is rated/received certificates of: Australia:PG
The Tracker - 2002 is rated/received certificates of: Argentina:13 Australia:M Iceland:16
what is the corect timming mark on ceo tracker 2002 v6
Remove the tire and wheel from your 2002 Pontiac Grand Prix. Remove the spring from the brake shoe. Remove the brake shoes. Reverse the process to install the new brakes.
I have a 2002 Chevy tracker and it gets anywhere from 28 to 25 miles to the gallon.
You will need to compress the 2002 Pontiac Grand Am strut spring with a spring compressor. Remove the top and bottom strut retaining bolts. Reverse the process to install the new strut.
The cast of The Tracker - 2002 includes: Damon Gameau as The Follower David Gulpilil as The Tracker Grant Page as The Veteran Gary Sweet as The Fanatic Noel Wilton as Fugitive
with tools.